Company Strength:
This article is about our company's PEEK Material mould. PEEK Injection mold is one of our company's best manufacturing molds. Our company has a strong professional design team that can provide precision PEEK Mould and PEEK Injection Moulding for customers.
Mold design Concept:
First of all, mold design is the first step in making PEEK molds, which involves determining the structure and size of the molds according to product requirements. Because PEEK has excellent mechanical properties and high temperature resistance, mold design should take into account the complexity and dimensional accuracy requirements of the product. In the design process, it is also necessary to consider how to effectively release gas and heat to avoid defects such as bubbles and silver wires.
Mold Material Selection:
PEEK molds usually use high-strength die steel materials, such as SKD11 or SKD61, which have good wear resistance and high temperature resistance, and can meet the high temperature requirements of PEEK processing.
Mold Heating System:
The heating system is crucial to the production of PEEK molds because PEEK is processed at a higher temperature. The heating system should be able to uniformly and stably raise the cylinder temperature to the set value, and maintain good temperature control accuracy. This helps to avoid quality problems caused by uneven temperature during the processing of the material.
Mold Injection Pressure and Speed Control:
The control of injection pressure and speed is also an important factor to consider when making PEEK molds. The injection pressure is generally between 100-150 MPa, and the injection speed is adjusted according to the structure and size of the product. The setting of these parameters directly affects the quality and production efficiency of the product.
Mold Maintenance and Maintenance:
Finally, maintenance and maintenance can not be ignored. PEEK mold may be damaged due to high temperature and pressure during use, so regular inspection and maintenance are required to ensure the long-term use of the mold and the consistency of product quality.
In summary, the production of PEEK mold involves multiple links from mold design to maintenance, and each step needs to be carefully planned and executed to ensure the quality and production efficiency of the final product.
Mold Information Description：
1.This mold is made of S136 stainless steel. S136 stainless steel service life of more than 500,000 times. The mold has 1*2cavities.
2. This mold is made of hot runner, The hot runner mold uses the hot runner system to directly transport the plastic material to the center of the mold, which can effectively avoid the cold material phenomenon in the injection process, thereby increasing the quality of the injection product.
Contact Now
