Dongguan Hongke Plastic Precision Mould Co.,Limited

News

Home > Company News > Test Mold Problem Point Analysis

Test Mold Problem Point Analysis

2024-04-02

1. Material selection issues


In the mold trial process of plastic products, material selection is a very critical link. Unsuitable materials may lead to problems such as insufficient product strength, poor wear resistance, and easy aging. Therefore, when selecting materials, the use environment and performance requirements of the product should be fully considered, materials that meet the standards should be selected, and necessary testing and verification should be conducted.


2. Design matching


Design matching refers to the degree of fit between mold design and product design. If the mold design is unreasonable, it may lead to problems such as poor product molding and dimensional deviation. Therefore, during the mold design process, the structural characteristics and usage requirements of the product should be fully considered to ensure the rationality and feasibility of the mold design.


3. mold making accuracy


Mold manufacturing accuracy is one of the important factors affecting product quality. If the mold manufacturing accuracy is not high, it may lead to problems such as poor product molding and dimensional deviation. Therefore, during the mold making process, advanced processing equipment and techniques should be used to ensure the accuracy and quality of the mold.


4. Defects in molding process


Molding process defects refer to various problems that occur during the molding process of plastic products, such as insufficient filling, overflow, bubbles, etc. These problems may lead to poor product appearance, reduced performance, etc. Therefore, during the selection and control of the molding process, factors such as material properties and mold structure should be fully considered, appropriate molding process plans should be formulated, and process parameters and operating procedures should be strictly controlled.


5. Mold wear and maintenance


Molds will inevitably experience wear and damage during use. If maintenance and repair are not carried out in time, it may lead to problems such as reduced product quality and reduced production efficiency. Therefore, during the use of the mold, regular inspection and maintenance should be carried out to detect and deal with mold wear and damage in time to ensure the normal use of the mold.


6. Product size deviation


Product size deviation refers to the deviation between product size and design requirements. If the product size deviation is too large, it may lead to problems such as product failure and reduced performance. Therefore, during the product production process, product dimensional accuracy and measurement accuracy should be strictly controlled to ensure that product dimensions meet design requirements.


7. Surface quality issues


Surface quality problems refer to various problems on the surface of the product, such as scratches, dents, oil stains, etc. These problems may affect the appearance and performance of the product. Therefore, during the product production process, the protection and treatment of the product surface should be strengthened to avoid surface quality problems.


8. Production efficiency issues


Production efficiency problems refer to low production efficiency problems that occur during the use of molds. If production efficiency is low, it may lead to problems such as increased production costs and reduced market competitiveness. Therefore, during the use of molds, the production process should be optimized, production efficiency improved, production costs reduced, and market competitiveness improved.


In summary, there are many issues that need to be paid attention to during the mold trial process of plastic products. We need to consider material selection, design matching, mold manufacturing accuracy, molding process defects, mold wear and maintenance, product size deviations, surface quality issues and production Comprehensive analysis and control of efficiency issues and other aspects. Only in this way can we ensure the quality and stability of plastic products and improve production efficiency and market competitiveness.


We are precision mould making and Injection Moulding manufacturer. We make Auto Functional parts,Auto Interior parts and Auto Structural component. We have strong design engineer team which can satisfy our customer all needs.


If you need any help about your new project, please send us your requirements. We hope that we will have opportunities to cooperate in the coming days. We will provide reliable quality and competitive price for you !


Injection mould

Send Inquiry

Tel:86-0769-82289418

Fax:86-0769-82289428

Mobile Phone:13925855181Contact me with Whatsapp

Email:sophia@hongkemould.com

Address:No.6, Xiangshan Road, Jichiling, Dalingshan town, Dongguan City, Guangdong Province, China, Dongguan, Guangdong

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send