Dongguan Hongke Plastic Precision Mould Co.,Limited

Servo Motor Unscrewing Mold

- manufacturer, factory, supplier from China

(Total 12 Products for Servo Motor Unscrewing Mold)

  • Outside Unscrewing Mold For Pipe Fitting Mould

    Outside Unscrewing Mold For Pipe Fitting Mould

    • Packaging: Wooden box
    • Supply Ability: Export about 400-500 set moulds per year
    • Min. Order: 1 Set/Sets
    • Transportation: Ocean,Land,Air,Express,Express

    This product is an outside unscrewing mold for pipe fitting Mould. PP material has low density, good mechanical properties, high heat resistance, good chemical properties, almost no water absorption, no reaction with most chemicals, pure texture, non-toxicity, good electrical insulation. In order to meet the...

    Contact Now

  • Custom Inside Unscrewing Mold Injection Mould Molding

    Custom Inside Unscrewing Mold Injection Mould Molding

    • Packaging: Wooden Box
    • Supply Ability: Export about 400-500 set moulds per year.
    • Min. Order: 1 Set/Sets
    • Transportation: Ocean,Land,Air,Express,Express

    This is an Connecter Mould and also an Inside unscrewing Mould. We are experienced of Unscrewing Mould making. Injection molding ensures consistent quality and precision for both internal threaded molds and connector molds, maintaining uniformity across production batches. Injection molding offers a wide range of...

    Contact Now

  • High Quality Inside Unscrewing Parts Mould

    High Quality Inside Unscrewing Parts Mould

    • Packaging: Wooden Box
    • Supply Ability: Export about 400-500 set moulds per year
    • Transportation: Ocean,Land,Air,Express

    Kindly check our product -- Inside unscrewing Mould. The plastic used is PP material. The injection moulding material of this product is H13 steel. If properly maintained, the service life can reach more than 500,000 times. We are very good at plastic injection mould of various high-performance material parts. In...

    Contact Now

  • Plastic Unscrewing Mold Inside and Outside

    Plastic Unscrewing Mold Inside and Outside

    • Packaging: Wooden Box
    • Supply Ability: Export about 400-500 set moulds per year
    • Transportation: Ocean,Land,Air,Express

    This is our high-quality Unscrewing Mould - unscrewing mold inside and outside. The plastic injection mould of this product is made of H13 steel. If properly maintained, the service life can reach more than 500,000 times. We are very good at manufacturing plastic unscrewing injection moulds. In addition, we can also...

    Contact Now

  • Inside Unscrewing Plastic Injection Mold

    Inside Unscrewing Plastic Injection Mold

    • Packaging: Wooden Box
    • Supply Ability: Export about 400-500 set moulds per year.
    • Min. Order: 1 Set/Sets
    • Transportation: Ocean,Land,Air,Express,Express

    This is a Inside unscrewing Mould. Designing and fabricating molds for internal threaded parts require intricate machining processes to ensure accurate thread profiles and dimensions. Achieving the precise geometry of the threads poses a significant challenge during mold creation. In order to make the injection...

    Contact Now

  • Pipe Fitting For Unscrewing Inside Injection Mold

    Pipe Fitting For Unscrewing Inside Injection Mold

    • Packaging: Wooden Box
    • Supply Ability: Export about 400-500 set moulds per year.
    • Min. Order: 1 Set/Sets
    • Transportation: Ocean,Land,Air,Express,Express

    This product is Pipe Fitting For Unscrewing Inside Injection Mold. Injection molding allows for intricate designs and customization options for both internal threaded molds and pipe fitting molds, accommodating diverse specifications and functional requirements. The mold is made of high quality mold insert steel S136...

    Contact Now

  • Plastic Mold for Pipe Fitting Inside Unscrewing Mould

    Plastic Mold for Pipe Fitting Inside Unscrewing Mould

    • Packaging: Wooden Box
    • Supply Ability: Export about 400-500 set moulds per year.
    • Min. Order: 1 Set/Sets
    • Transportation: Ocean,Land,Air,Express,Express

    This product is Plastic Mold for Pipe Fitting Inside Unscrewing Mould. Polyvinyl Chloride (PVC) offers excellent characteristics for pipe fitting molds, including corrosion resistance, chemical resistance, and durability, making it ideal for applications requiring reliable pipe systems. The mold is made of high...

    Contact Now

  • Injection Mold for Inside Unscrewing Mould

    Injection Mold for Inside Unscrewing Mould

    • Packaging: Wooden Box
    • Supply Ability: Export about 400-500 set moulds per year.
    • Min. Order: 1 Set/Sets
    • Transportation: Ocean,Land,Air,Express

    This is the Inside unscrewing Mold customized by our company according to customer needs. This product is a sewage purification pipeline. Our company specializes in the production of Inside unscrewing Mold, Outside unscrewing mold, unscrewing mold inside and outside. The gate way of this mold is edge gate, and the...

    Contact Now

  • Outside Unscrewing Mold For Underwater Cleaning Robot

    Outside Unscrewing Mold For Underwater Cleaning Robot

    • Packaging: Wooden box
    • Supply Ability: Export about 400-500 set moulds per year
    • Min. Order: 1 Set/Sets
    • Transportation: Ocean,Land,Air,Express,Express

    This product is an important parts of the underwater cleaning robot. The product is made of PP + 30GF material, which has high tensile strength, large impact energy absorption, elastic coefficient, good heat resistance and other properties. In order to meet the customer's product practicality and appearance...

    Contact Now

  • Plastic Injection Molding For Inside Unscrewing Mould

    Plastic Injection Molding For Inside Unscrewing Mould

    • Packaging: Wooden Box
    • Supply Ability: Export about 400-500 set moulds per year.
    • Min. Order: 1 Set/Sets
    • Transportation: Ocean,Land,Air,Express

    This is a complex structural mold designed and produced by our company, also known as Inside unscrewing mold. The product material used for injection molding is PA6+ 30GF. The melting point of this material is 245-255°C, and it can still maintain its stable performance at high temperature, and has good acid and alkali...

    Contact Now

  • Plastic Inside Unscrewing Precision Mould With Cap Mold

    Plastic Inside Unscrewing Precision Mould With Cap Mold

    • Packaging: Wooden Box
    • Supply Ability: Export about 400-500 set moulds per year.
    • Min. Order: 1 Set/Sets
    • Transportation: Ocean,Land,Air,Express,Express

    This product is Plastic Inside Unscrewing Precision Mould With Cap Mold. Injection molding allows for the simultaneous production of internal threaded molds and cap molds, streamlining the manufacturing process and reducing production time. This can extend cycle times and impact production efficiency. By combining the...

    Contact Now

  • Unscrewing Moulds With Inside Screw Mold

    Unscrewing Moulds With Inside Screw Mold

    • Packaging: Wooden box
    • Supply Ability: Export about 400-500 set moulds per year
    • Min. Order: 1 Set/Sets
    • Transportation: Ocean,Air,Land,Express

    This is an unscrewing moulds with inside screw mold designed and produced by our company. Inside unscrewing mold is a type of injection mold used to create threaded or screw-like features on the inside of a plastic part. This type of mold allows for the production of parts with internal threads, such as caps,...

    Contact Now

  • Video
  • Outside Unscrewing Mold For Pipe Fitting Mould
  • Custom Inside Unscrewing Mold Injection Mould Molding
  • High Quality Inside Unscrewing Parts Mould
  • Plastic Unscrewing Mold Inside and Outside
  • Inside Unscrewing Plastic Injection Mold
  • Pipe Fitting For Unscrewing Inside Injection Mold
  • Plastic Mold for Pipe Fitting Inside Unscrewing Mould
  • Injection Mold for Inside Unscrewing Mould
  • Outside Unscrewing Mold For Underwater Cleaning Robot
  • Plastic Injection Molding For Inside Unscrewing Mould
  • Plastic Inside Unscrewing Precision Mould With Cap Mold
  • Unscrewing Moulds With Inside Screw Mold
  • Related Information

High Quality Products

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home > Servo Motor Unscrewing Mold

Send Inquiry

Tel:86-0769-82289418

Fax:86-0769-82289428

Mobile Phone:13925855181Contact me with Whatsapp

Email:sophia@hongkemould.com

Address:No.6, Xiangshan Road, Jichiling, Dalingshan town, Dongguan City, Guangdong Province, China, Dongguan, Guangdong

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send